2024 Kunz Engineering Rough Cut Mower AcrEase MR55KEI

Swipe to View More

  • Year 2024
  • Make Kunz Engineering
  • Model Rough Cut Mower AcrEase
  • Engine Model: Confident Twin Cylinder EFI
2024 Kunz Engineering Rough Cut Mower AcrEase MR55KEI

2024 Kunz Engineering Rough Cut Mower AcrEase MR55KEI

2024 Kunz Engineering Rough Cut Mower AcrEase MR55KEI

Commercial Grade Pull Behind Rough Cut Mower AcrEase Model MR55KEI

Top of the line commercial grade 57" rough cut model with a commercial grade twin cylinder electric start engine and electric clutch blade engagement. Works great behind an ATV, UTV or small tractor for larger acreage jobs.

Features may include:
  • 57" Cutting Width
  • 27 HP Kohler Commercial Grade Twin Cylinder Engine
  • Fuel Injected
  • Heaviest Duty and Highest Performance Pull Behind Mowers in the Industry
  • 4 Tire Design with Large 15" Diameter Tires
  • Quick Two Crank Height Adjust System
  • Height Adjustment Range From 2" to 8"
  • Electric Clutch Blade Engagement
  • Conservative 2" Diameter Sapling Rating
  • Pull Directly Behind or Fully Offset to the Side of the Tow Vehicle.
  • Not for sale in California unless specifically used for agriculture. Please call for additional information.
  • 27HP Kohler Confidant commercial grade twin cylinder engine with EFI (Fuel Injection)
  • The blade spindles used on the AcrEase mowers are built out of heavy-duty welded steel hubs, 30mm (1-3/16") steel shafts, machined steel blade holders and large sealed ball bearings.
  • The cutting height can quickly and easily be adjusted from 2"-8" with the two crank height adjustment system.
  • The main deck is built out of 10 GA (.135") thick steel with a 1/4" thick steel top plate for reinforcement. An additional 1/4" thick steel plate is welded in the blade spindle mounting location. The three layers of steel in the blade spindle mounting area add up to just over 5/8" thick.
  • Unique twin blade design provides more of a mulch action that reduces the size of the clippings and reduces bunching.
  • The blades are engaged with an electric clutch which is activated by simply pulling a switch. Electric clutches can extend the life of the belt and reduce overall belt maintenance.
  • The tow bar features a farm clevis type connection. This system provides more degrees of motion than most types of hitching systems. This is necessary to prevent binding in rough uneven terrain.
  • Large 3-1/4 gallon fuel tank that provides 3 to 3-1/2 hours of run time

Engine

Engine Manufacturer OHV Kohler Commercial
Engine Model: Confident Twin Cylinder EFI
Engine Power 27 hp
Lubrication Pressure With Filter (Low Oil Pressure Shut-Off Included)
Air Filter Cyclonic Air Filtration System

Drivetrain

Drive System Drive Method: 1 B Section "V" Belt (Kevlar)

Wheels & Tires

Tires, Rear Specification 15/600×6, 4 Ply Tubeless
Tires, Front Specification 5.30/4.50×6, 4 Ply Tubeless

Operational

Operating Speed Blade Tip Speed (ft/mm): 19000

Chassis

Deck Thickness Metal: 10 GA (.135") | Top Plate: Two 1/4" Thick Plates

Dimensions

Cutting Width 57"
Height Cutting: 2.0 to 8.0 By Two Cranks
Dimensions Shaft Size: 30 mm (1-3/16")

Capacities

Fuel Capacity 3 Gal.

Weights

Weight 580 lbs

Features

Features Class Mower: Rough Cut (Rear Discharge) | Number of Mower Blades: 2-30" | Hitch: Direct Behind or Full Offset to Either Side | Blade Engagement Clutch: Electric Clutch | Bearing#: 6206-2RST

Warranty

Warranty 1 Year Commercial | Engine: 3 Year Commercial

Product Photography